Hook-and-Loop Selection
Choosing a Hook-and-Loop Fastener
Start with how the fastener will attach. Will it stick to a surface, wrap around an object, or be sewn onto fabric? Then check dimensions and the direction of the load.
Adhesive-Backed Fasteners for Surfaces
The adhesive attaches to the mounting surface while the hook and loop faces allow repeated opening and closing. For a removable fastening point on an equipment housing, tell your supplier the housing material and finish, such as painted metal or textured plastic. Test samples on the actual surface and apply the load in the direction expected in use.
Adhesive-Backed Roll Sizes
Xinwei's published materials list 10, 25, and 50 mm as common widths. Packaging catalog examples include 25 mm × 2 m and 50 mm × 5 m rolls. Confirm the width and roll length for the specific product you plan to order.
Listed adhesive options include hot-melt and acrylic adhesives. Share the mounting material, its surface condition, and the operating temperature so we can select the adhesive and prepare a sample.
View Acrylic Adhesive-Backed Hook & Loop Photos →
Back-to-Back Fasteners for Wrapping
Back-to-back tape has hooks on one side and loops on the other, so it fastens to itself when wrapped around a cable bundle or object. Measure the bundled circumference and allow extra length for the overlap. Check that the strap width fits the available space.
Sew-On Fasteners for Fabric
Consider sew-on tape for bag openings, garment closures, and fabric sleeves. When reviewing samples, check the fabric, stitch placement, and edge allowance. If the closure opens frequently, check how easy it is to grasp the end of the tape.
What to Provide for Sampling
Share a photo of the mounting location or a small sample of the mounting material. Include the intended width, length, operating temperature, humidity, and how often the fastener opens. Indicate whether the force runs along the surface or peels the fastener up at the edge.
Sizing a Cable Tie
Measure the circumference of the tightened bundle and add enough length for the hook and loop faces to overlap. If you often need to open the bundle, consider a back-to-back tie and position the overlap where it is easy to reach.
The Xinwei catalog illustrates the 12 × 150 mm back-to-back cable tie and shows how it wraps around a bundle.
View the 12 × 150 mm Cable Tie →
Technical reference 3M hook-and-loop fastener technical resources
Chinese national standard · View GB/T 23315-2009 Hook-and-Loop Fasteners (Chinese PDF)
Explore Xinwei Hook & Loop